Course
Skills Expanded
Creating Your Own Custom Pyro FX in Houdini
In this Houdini tutorial we are going to learn how to do custom Pyro FX in Houdini. Software required: Houdini 12.5.
What you'll learn
In this Houdini tutorial we are going to learn how to do custom Pyro FX in Houdini. We will use the combustion model of the Pyro Solver and set up custom attributes to source fire and smoke simulations. We will get a good understanding of various shape tabs in the Pyro Solver and end the tutorial by putting everything we learned previously into a small practical example. Software required: Houdini 12.5.
Table of contents
Introduction and Project Overview
0mins
Creating Your Own Custom Pyro FX in Houdini
190mins
- Understanding the Voxel Container 5m
- Introduction to the Pyro Solver 10m
- The Simulation Tab in Pyro Solver 12m
- The Combustion Model 18m
- The Shape Tab 14m
- Methods of Sourcing from the Fluid Source Node 16m
- Methods of Sourcing from Particles 19m
- Setting up Text on Fire 9m
- Setting up Attributes on the Floor 18m
- Setting up the DOP Network for Pyro Simulation 17m
- Setting up Attributes on the Font Geometry 21m
- Setting up the Fluid Source Node 6m
- Setting up the DOP Network for the Fonts 13m
- Caching Our Pyro Simulation 11m
